LED Touch Controller DALI CT - EDT2
€95,99 Incl. tax €139,62 Incl. tax. Out of stock, but available
Specifications
Information
Ltech EDT2 LED Touch Controller DALI CT
Article Number: EDT2
Product Description
The Ltech EDT2 LED Touch Controller DALI CT is an advanced and user-friendly control solution for DALI lighting systems. This touch controller supports switching, dimming, and tunable white control, offering both group and broadcast modes. Thanks to the touch operation with vibration feedback, usage is simple and intuitive.
Main Features
- Supports DALI standard protocol IEC62386-102, 207, 209
- Switching, dimming, and tunable white control
- Zone control available
- Powered via DALI bus
- Easy address setting
- Supports scene, group, unicast, and broadcast mode
- Touch panel with vibration feedback
- IP20 rating for indoor use
Technical Specifications
Parameter | Specification |
---|---|
Type | DALI Touch Panel |
Power Supply | DALI Bus Power |
Control Modes | DALI DT8, Tunable White |
Number of Zones | 4 |
Number of Channels | 2 |
Functions | Programmable |
Operating Temperature | -30°C ~ 55°C |
Dimensions | 86 × 86 × 37 mm |
Package Size | 113 × 112 × 50 mm |
Weight | 240 g |
Housing Color | White |
Housing Material | PC (Polycarbonate) |
Mounting | Built-in |
IP Rating | IP20 (Indoor use only) |
Country of Origin | People's Republic of China |
HS Code | 853710 |
Certifications | CE, RoHS |
EU Compliance | 2014/30/EU (EMC Directive), 2011/65/EU + 2015/863/EU (RoHS) |
Important Notice
This product must be installed and adjusted by a qualified professional. The product is not waterproof (unless otherwise specified). Avoid exposure to direct sunlight and rain. When installed outdoors, a waterproof enclosure must be used. Ensure good ventilation to extend the product's lifespan.
Address Settings and Control Modes
This device can be set to group mode or broadcast mode.
Group Mode
Up to 16 group addresses can be configured (0-15). Buttons 1, 2, 3, and 4 on the panel function as group keys.
Example: If Y is set to 5, the first group value is 5 and the addresses are 5, 6, 7, 8.
Example: If Y is set to E, the first group value is 14 and the addresses are 14, 15, 0, 1.
Broadcast Mode
For broadcast mode, X must be set to 8 or 9. In this mode, buttons 1, 2, 3, and 4 can control the entire system.
Additional Guidelines
- Avoid installing near large metal objects to prevent signal interference.
- Keep the product away from strong magnetic fields and high-pressure areas.
- Check that the input voltage complies with product specifications.
- Ensure all wiring is correct before powering on to avoid short circuits or damage.
- If a fault occurs, contact the supplier. Do not attempt to repair the product yourself.