Signal converter

PWM-60-24DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 24Vdc at 2.5A; Dimming with DALI 2.

This interface converts DALI signals to an analog 0-10V signal, suitable for 1-10V control inputs. Compatible with DALI Device Type 5, supports linear and logarithmic dimming curves, 0-10V or 1-10V range.

AC-DC single output LED driver with constant voltage (CV); PWM output for LED strips; Output 24Vdc at 3.75A, 90W power; Dimmable with DALI 2.0; IP67 enclosure.

CV LED driver with PWM output for LED strips, 24Vdc 5A output, dimmable with DALI 2.0, IP67, universal input 90-305V.

This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

DALI to 0-10V PWM interface, converts DALI signals to 0-10V PWM signal. Linear or logarithmic dimming curve, compatible with DALI Device Type 5. Suitable for ballasts with PWM control input.

DALI Dim2warm interface for controlling brightness and color temperature with a single DALI DT6 address. Separate outputs for cold and warm white light. Box installation.

40W AC-DC LED driver with CC; Modular output 0.35A-1.05A; DALI 2.0 and push dimming; extra 12Vdc at 50mA; IP20; 81.5x23x123.5 mm; input 180-295V; enclosed plastic housing. RoHS compliant.

AC-DC LED driver with Constant Voltage (CV); 12V, 10A output, 120W; PWM for LED strips; dimming with DALI 2.0; IP67 housing.

The PWM-90-12DA2 is a 90W 12V constant voltage (CV) LED driver with PWM output and DALI 2.0 dimming. Ideal for LED strips, waterproof (IP67), high efficiency, and low no-load power consumption.

PWM-90-48DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 48VDC at 1.25A; Dimming with DALI 2.0

This interface converts DALI signals into a galvanically isolated PWM signal (0-100%/10-100%) and is suitable for linear/logarithmic dimming curves. Suitable for control devices with PWM input. Max. output current: 100mA, max. voltage: 60V DC.

Interface converting DALI signals to 1-10V for integrating control devices into a DALI system. Includes switching relay and Wieland connectors.

This interface converts DALI signals into a galvanically isolated 0-10V analog signal. Compatible with DALI Device Type 5 (IEC62386-206). Linear or logarithmic dimming curve selectable.

The DALI RM16 2x0-10V interface converts DALI signals to 1-10V for controlling brightness and color temperature in LED lighting. It offers automatic calibration and a relay for switching power supply on/off.

DALI RM16 2×0-10V interface for controlling 2 LED drivers with 1-10V input. Features relay switch, automatic calibration, DIN rail mounting, and is compatible with DALI Cockpit for advanced configuration.

The DALI DT8 to DT6 converter converts DALI DT8-Tc commands to DALI DT6 signals, enabling dimming and color temperature settings for two DALI DT6 LED drivers.

LED driver (CV) with one channel, can be operated as PWMBooster or Dimmer. The device operates as PWM-Booster, if PWM-signals are applied to the input (50Hz-1kHz). If operated with 100kΩ potentiometer or 0-10V control devices (active and passive), the dev

Interface for DALI to 0-10V PWM, switches ballast power on/off. DALI device type 5, linear/logarithmic dimming curve, IP20, max 160A inrush, galvanic isolation.

The DALI RM8 0-10V PWM interface converts DALI signals into a 0-10V control voltage for integrating 0-10V controlled devices into a DALI system. Includes relay for on/off switching.