Tridonic Constant Voltage LED driver LCA 100W 24V one4all SC PRE SP
€78,27 Excl. tax
€160,39 Excl. tax
€94,71 Incl. tax €194,07 Incl. tax. Out of stock, but available
€94,71 Incl. tax €194,07 Incl. tax. Out of stock, but available
Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
24 V, 100W Read more
Specifications
Brand:
Tridonic
Housing:
Remote housing
Input voltage:
230Vac
DALI Type:
DT6
DALI-2 certified:
No
Article number:
28001922
EAN:
9006210624433
Availability:
Out of stock, but available
Delivery time:
Will be shipped within approximately 8 working days.
Information
Datasheet
Product description
- NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
- Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
- Can bei either used built-in or independent with clip-on strain-relief (see data sheet chapter: 1. Standards)
- The strain relief is included. In the single packaging (SP) each Driver has also an individual packaging.
- One4all interface and ready2mains enable different dimming options
- Dimming range 1 to 100 %
- No additional external dimmer is needed
- Suitable for emergency escape lighting systems acc. to EN 50172
- Nominal lifetime up to 50,000 h
- 5 years guarantee (conditions at www.tridonic.com)
Typical applications
- Cove lighting, facade accent lighting, ceiling integration
Technical details
- 24 V, 100 W
- Small design (295 x 43 x 30 mm) with stretched-compact strain relief
- Small cross section
- Push terminals for simple wiring
- Output terminals (+/–) equipped twice for more flexibility in the application
Interfaces
- one4all (DALI DT 6, DSI, switchDIM, corridorFUNCTION)
- ready2mains (configuration and dimming via mains)
- Terminal blocks: 45° push terminals
System solution
- Tridonic LLE-FLEX ADV 600, 1,200, 1,800 lm/m
- Tridonic LLE-FLEX EXC 600, 1,200, 1,800, 2,500 lm/m
- In connection with Flex accessories wire to PCB plug
- Test the function of third party light sources before use at low dimming levels to ensure the dimming function works perfectly
| Rated supply voltage | 220 – 240 V |
| AC voltage range | 198 – 264 V |
| DC voltage range | 176 – 280 V |
| Mains frequency | 0 / 50 / 60 Hz |
| Typ. rated current (at 230 V, 50 Hz, full load) | 468 mA |
| Typ. current (220 V, 0 Hz, full load, 15 % dimming level) | 93 mA |
| Leakage current (at 230 V, 50 Hz, full load) | < 0.26 mA |
| Typ. input current in no-load operation | 40.4 mA |
| In-rush current (peak / duration) | 43 A / 280 µs |
| Max. input power | 111 W |
| Typ. power consumption on stand-by | < 0.2 W |
| Typ. input power in no-load operation | 2.6 W |
| Typ. efficiency (at 230 V, 50 Hz, full load) | 93 % |
| λ (at 230 V, 50 Hz, full load) | 0.99 |
| THD (at 230 V, 50 Hz, full load) | < 5.7 % |
| Starting time (DC mode) | < 0.32 s |
| Starting time (at 230 V, 50 Hz, full load) | < 0.35 s |
| Switchover time (AC/DC) | < 0.3 s |
| Turn off time (at 230 V, 50 Hz, full load) | < 0.02 s |
| Output voltage tolerance | ± 1 V |
| Output LF voltage ripple (< 120 Hz) | ± 5 % |
| Max. output voltage (U-OUT) | 60 V |
| Dimming range | 1 – 100 % |
| PWM frequency | ≥ 1000 Hz |
| Mains surge capability (between L - N) | 1 kV |
| Mains surge capability (between L/N - PE) | 2 kV |
| Type of protection | IP20 |
| Length | 295 mm |
| Width | 43 mm |
| Height | 29.8 mm |
| Lifetime | up to 50000 h |
| Guarantee | 5 years |
(1) Valid at 100 % dimming level.
(2) Depending on the DALI traffic at the interface.
(3) Valid at 100 % dimming level (for DC the value may differ).
(4) Valid for immediate change of power supply type otherwise the starting time is valid.
© Copyright 2024 DALIwarehouse.com | All rights reserved | Alle rechten voorbehouden
