Collection

High-quality DALI LED driver with 1-12W power. Suitable for indoor use, dimmable from 0-100% flicker-free. Protected against overheating, overload, and short circuit.

DALI-2 RM16 is a relay switch for integrating non-dimmable ballasts into DALI systems. Switches up to 2kW at 250V AC, with configurable power-up and system-failure settings. Features zero-cross switching.

DALI-2 input controller with 4 independent inputs for floating contacts or push buttons. Powered via the DALI-2 line and compatible with DALI-2 Application Controllers. Includes 25 cm connection wires.

24V DC power supply with max 130mA output. Suitable for installation box. Operating temperature -20°C to +55°C. Protection class IP20. Color grey. Dimensions: 60 x 33 x 15 mm.

DALI Jalousie module for ceiling installation. Suitable for controlling 230V blinds motors via DALI. 4 programmable operations for opening/closing and adjusting slat tilt. No extra power supply needed, only via DALI.

LED Driver DALI NFC, 100-500mA, 12W, 230V AC, 2 channels, Constant Current, Tunable White, 82% efficiency, dimmable 0-100%, IP20, CE certified, for indoor use.

LED DALI RGB touch controller for switching, dimming, and color control. Supports group and broadcast modes. Powered via DALI bus. Touch with vibration feedback.

AC-DC single output LED driver with constant voltage (CV); PWM output for LED strips; Output 24Vdc at 3.75A, 90W power; Dimmable with DALI 2.0; IP67 enclosure.

This interface converts DALI signals to an analog 0-10V signal, suitable for 1-10V control inputs. Compatible with DALI Device Type 5, supports linear and logarithmic dimming curves, 0-10V or 1-10V range.

DALI Dim2warm interface for controlling brightness and color temperature with a single DALI DT6 address. Separate outputs for cold and warm white light. Box installation.

Wireless interface module for communication between DALI Cockpit software and DALI Bus devices. Supports bidirectional data transfer for configuration and monitoring, with a range of up to 300 meters depending on local conditions.

The DALI PS128 provides reliable DALI bus power with guaranteed 128mA output and maximum 250mA output current. Suitable for 64 DALI devices.

Intelligent constant current LED driver (200-800mA, 30W) with 230Vac input and DALI-2 DT6 interface. NFC configurable, with protection against overheating, short circuit, overload, and overvoltage.

DALI-2 PIR sensor for light and occupancy detection. Developed to EN 62386-101 Ed.2. Requires an application controller. Powered via DALI, software adjustable, IP20, 5-year warranty.

DALI LED Power Supply CW-WW CC for independent control of light level and color temperature. Input 230VAC, output max. 1100mA. Available in various current options.

DALI-2 RM16 HS WE provides switching contacts via the DALI bus, switches 2kW loads, and includes zero-crossing switching for longer lifespan. Configurable with DALI Cockpit software.

The wDALI Remote is a wireless, configurable remote control with 12 buttons. This product does not include a receiver, only the transmitter.

Compact 24V LED driver (60W), dimmable via one4all (DALI-2, DSI, switchDIM), for flexible strips. NFC programmable, emergency ready, strain relief included.

DALI-2 MC1L control module with galvanically isolated switching input for mains voltage. Supports dimming, switching, scenes, and more via DALI Cockpit.

DALI-2 Switch Cross pushbutton module with application controller: customizable buttons for DALI commands such as dimming, switching, and scenes. Easy configuration via DALI Cockpit or Lunatone software.

LED Driver DALI DT8 150W 24V, constant voltage, 2 channels, PWM-CV signal, DALI-2, 0-100% dimmable, IP20, CE & ENEC certified. Protection against overload & short circuit.

DALI LED touch controller with 4 zones, dip switch configuration, and DALI-1 signal. Built-in mounting, IP20, suitable for indoor use. CE certified.

Amplifies DALI signal (relay mode) and extends DALI setups (extended mode). Serves as DALI power supply, switchable via DIP switches.

DALI LED driver with NFC configuration, 300-1050mA, 40W. Ultra-thin design, flicker-free dimming (0.01%-100%), overload, overvoltage, and short-circuit protection. Suitable for Tunable White and DALI-2 T6/DT8.