Collection

The LED Touch Controller DALI 3 zone - EDA3 is a 3 channel switch. This means that it can serve 3 addresses.

Compact DALI-2 CS sensor with PIR, light, temperature, humidity, air pressure, air quality. Various types available.

A compact DALI motion detector with integrated light and temperature sensor. The module can be used as a control unit for a DALI system or as a measurement tool in combination with central control unit. The module is suitable for various applications such

DALI RM16 2×0-10V interface for controlling 2 LED drivers with 1-10V input. Features relay switch, automatic calibration, DIN rail mounting, and is compatible with DALI Cockpit for advanced configuration.

DALI CDC for DIN rail, for automatic color temperature and brightness control of Tunable White DALI DT8 luminaires. Real-time clock, easy installation, configurable via DALI Cockpit.

DALI2 parts 101,102,207
Dimmable 12V LED driver for constant voltage PWM-CV 150 W
Power 230VAC output 12V

Adopt DALI standard protocol IEC62386-102,207,209.
Support switch, dimming and color adjustment function; zone control is available.
DALI bus supply power.
Easy to set addresses.
Support scene, group, unicast and broadcast mode.
Touch vibration

DALI RGB LED Dimmer CC DT8 provides dynamic RGB color control with one DALI address. Supports 12-48V DC, output 3-45V, up to 700mA per channel. Available with common plus and common minus connectors.

LED driver (CV) with one channel, can be operated as PWMBooster or Dimmer. The device operates as PWM-Booster, if PWM-signals are applied to the input (50Hz-1kHz). If operated with 100kΩ potentiometer or 0-10V control devices (active and passive), the dev

The DALI Sequencer is a control unit for automatic recall of timed instruction sequences. It can define 4 different sequences that can be started and stopped with DALI commands.

The LED Touch Controller DALI 2 Zone - EDA2 is a 2 channel switch. This means that it can serve 2 addresses.

PWM-90-48DA2
AC-DC Single output LED driver Constant Voltage (CV); PWM output for LED strips; Output 48VDC at 1.25A; Dimming with DALI 2.0