Lunatone

DALI-2 Display Bus Extension for extending DALI-2 7” Displays. Adds 3 extra DALI lines, each with 64 addresses. Equipped with Ethernet and 24V power supply.

DALI LED driver for Tunable White lighting, with 2 outputs, supports DT8, Balance&Dim, Dim2Warm, SwitchDim2. Input voltage: 12-48V DC, max. output current per channel: 350-1000mA.

DALI LED-driver for the constant current LED modules (CC) with 1 channel. Output signal can be controlled via DALI or SwitchDim2. Available with input voltage of 12V to 48V DC, different output currents ranging from 350mA to 2800mA, and PWM output.

DALI Jalousie module for ceiling installation. Suitable for controlling 230V blinds motors via DALI. 4 programmable operations for opening/closing and adjusting slat tilt. No extra power supply needed, only via DALI.

A compact DALI motion detector with integrated light and temperature sensor. The module can be used as a control unit for a DALI system or as a measurement tool in combination with central control unit. The module is suitable for various applications such

Compact module for 2 DALI groups. Use conventional switches for dimming and switching. Equipped with a rotary switch for group selection. Powered via the DALI signal line.

The DALI USB HS is an interface for communication between the DALI Cockpit PC software and DALI devices. It supports bidirectional data transfer and is suitable for DIN rail mounting. Compatible with standard DALI and DALI-2 protocols.

DALI 2Ch LED Dimmer CV with 2 independently controllable channels. Supports DT6, Balance&Dim, Dim2Warm, and SwitchDim2. Suitable for 12-48V DC, max 16A. IP20.

The wDALI Remote is a wireless, configurable remote control with 12 buttons. This product does not include a receiver, only the transmitter.

Wireless interface module for communication between DALI Cockpit software and DALI Bus devices. Supports bidirectional data transfer for configuration and monitoring, with a range of up to 300 meters depending on local conditions.

DALI-2 Switch Cross pushbutton module with application controller: customizable buttons for DALI commands such as dimming, switching, and scenes. Easy configuration via DALI Cockpit or Lunatone software.

The DALI-2 Display 7" Emergency is a universal control panel for DALI emergency lighting systems, offering status monitoring, test results, and automatic functionality checks.

DALI LED Power Supply: Provides 25W power at 24V/36V constant voltage. Suitable for 230V AC with safe separation from mains and DALI. Independent brightness and color temperature control.

DALI RM16 CEL ist ein DALI-gesteuertes Relais für 230V AC Lasten bis 2000VA. Zero-Cross-Schaltung und programmierbare Start-/Systemfehler-Einstellungen. DALI 2 zertifiziert.

The DALI RM16 DE WE relay controls 230V AC loads up to 2kW via DALI. Features inrush current limitation and configurable behavior on bus failure. Ideal for high inrush currents.

This interface converts DALI signals to a 1-10V control signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. With the help of the switching relay the power supply of operating devices can be switched on an

The DALI PS24 100mA supplies the DALI bus system with 24-48V DC power, supporting up to 50 DALI devices with a guaranteed output current of 100mA. Suitable for installation in electrical boxes or Class II devices.

Compact DALI-2 sensor for motion, light, temperature, humidity, pressure, and air quality. With Application Controller, suitable for direct installation or integration into a building system. Ideal for energy management and comfort enhancement.

Compact DALI-2 sensor module with PIR motion detection, light intensity measurement, and constant light control. Includes application controller, suitable for indoor and outdoor use (IP65), ideal for wall mounting in corridors.

wDALI Transceiver is a wireless DALI control device connected to the DALI bus. Powered by DALI bus, frequency band 2.4 GHz, reception range up to 300m outdoors.

DALI Dim2warm interface for controlling brightness and color temperature with a single DALI DT6 address. Separate outputs for cold and warm white light. Box installation.

The DALI-2 RM16 HS WE is a DIN-rail mounted switching actuator with a changeover contact. It supports loads up to 2kW, offers zero-cross switching for longer lifespan, and is configurable with DALI Cockpit software.

DALI-2 MC1L control module with galvanically isolated switching input for mains voltage. Supports dimming, switching, scenes, and more via DALI Cockpit.

The DALI Proxy expands your DALI circuit easily and allows device replacement without re-addressing. Controls 2 DALI devices via 1 address, works with DALI Cockpit software.