Lunatone

Phase dimmer with DALI input for 230V lamps, 3-25W. Suitable for installation in class II devices. Supports leading and trailing edge dimming with automatic load detection.

The DALI RGBW LED Dimmer CV DT8 provides precise control of RGBW lighting through a single DALI address or two switch inputs. Operates with 12V-48V DC and supports various mounting methods.

Capacitive 7″ touchscreen with 24-bit color depth for DALI systems. Offers dimming, switching, RGB color management, and more via WLAN and DALI. With integrated sensors for temperature, humidity, and air quality.

The DALI-2 IoT Gateway connects DALI systems to IoT devices via LAN, offers RESTful API and WebSocket, supports Node-RED integration, and DIN rail mounting.

The DALI-2 RM8 provides a relay contact controlled via the DALI bus, switches loads up to 2kW, and extends lifespan through zero-crossing switching.

DALI PS power supply for DALI bus. Output current 250mA, DIN rail mount. Supports 64 DALI devices. Input voltage 120-240Vac, IP40. Short-circuit proof, startup time 250ms, operating temp -20°C to +55°C.

Compact DALI-2 module with 4 potential-free inputs. Suitable for dimming, switching, scenes, and color control. Configuration via DALI Cockpit and NFC.

DALI-2 PD 300W phase dimmer for 230V dimmable luminaires in DALI systems. Available in leading edge, trailing edge or universal with automatic load detection. From firmware 3.5, supports DALI-controlled switching.

The DALI-2 USB Interface 30mA facilitates communication between DALI Cockpit PC software and DALI devices. It supports addressing and configuration of DALI installations with bidirectional data connection.

Interface for changing DALI system parameters via mobile devices. Android and iOS app available. Supports light level, circadian curve, sensors, RTC timers, and motion detectors.

Wireless DALI bridge for bidirectional connection of separated DALI lines. Supports wireless control and queries over distances up to 1 km outdoors and 500 m indoors.

The compact DALI-2 Expander DIN rail extends the DALI line, provides a sub-circuit with 200mA power supply, and increases the cable length by 300m. Suitable for DIN rail installation.

DALI-2 Switch Cross module with four configurable buttons. NFC setup via smartphone. Supports dimming, switching, scenes, macros, and more. Available with various symbols.

DALI 1Ch LED Dimmer CV for constant voltage LED modules, 12V-48V DC. Current ratings up to 16A, dimmable via DALI or Sw&Dim/SwitchDim2. Available in different housings: flush mount, ceiling mount, and DIN rail.

DALI USB: Interface for communication between DALI Cockpit software and DALI bus. Available in various versions, including mounting options and integrated bus power supply. Supports DALI, DALI-2, and extended DALI protocols.

DALI-2 CS Mini with application controller. Motion and light sensor for constant light control. Suitable for indoor and outdoor, available in black and white.

Wireless wDALI module with 4 configurable inputs and battery power. Easy to install within receiver range. Programmable via DALI Cockpit, supports dimming, switching, and dynamic scenes.

The 0-10V to DALI Converter converts a 0-10V analog signal into a DALI dimming value. Suitable for DIN-rail mounting, configurable via DALI Cockpit Software, 12-24V DC supply.

DALI-2 RM16 is a relay switch for integrating non-dimmable ballasts into DALI systems. Switches up to 2kW at 250V AC, with configurable power-up and system-failure settings. Features zero-cross switching.

The DALI-2 Display 4″ is a versatile control device with a 4″ capacitive touchscreen and 24-bit color depth. It features DALI and WLAN interfaces, as well as sensors for temperature, humidity, air quality, and more.

Compact 1TE DIN rail module for controlling 4 DALI lines (up to 256 devices). Configuration via Ethernet with DALI-Cockpit software. Supports Modbus TCP. Includes RTC, scheduler, and central functions.

DALI LED dimmer with 2 outputs for Tunable White lighting, controllable via DALI DT8. Operates on 12-48V DC, dimming range 0.1%-100%. Supports Balance&Dim, Dim2Warm, and SwitchDim2 modes.

The DALI Repeater extends DALI networks up to 600m, amplifies bidirectional signals, and provides galvanic isolation. Suitable for up to 64 devices, with separate power supply per subcircuit.

Das KNX DALI-2 Gateway unterstützt bidirektionale Kommunikation zwischen KNX und DALI. Es konfiguriert DALI-Geräte mit der DALI Cockpit PC-Software und ist voll multimasterfähig.