Phase dimmer and relay

Phase dimmer with DALI input for 230V lamps, 3-25W. Suitable for installation in class II devices. Supports leading and trailing edge dimming with automatic load detection.

DALI-2 PD 300W phase dimmer for 230V dimmable luminaires in DALI systems. Available in leading edge, trailing edge or universal with automatic load detection. From firmware 3.5, supports DALI-controlled switching.

The DALI-2 RM8 provides a relay contact controlled via the DALI bus, switches loads up to 2kW, and extends lifespan through zero-crossing switching.

The LCM-25DA2 LED driver is an AC-DC multi-stage output component with constant current (CC). Output of 0.35A/0.6A/0.7A/0.9A/1.05A, suitable for DALI 2.0 and push dimming.

The DALI-2 4Ch E-RM module provides four DALI bus-controlled relay outputs for switching 230V loads up to 4 x 10W. Each channel has its own DALI address, configurable via DALI Cockpit. Ideal for DIN rail mounting.

DALI-2 RM16 HS WE provides switching contacts via the DALI bus, switches 2kW loads, and includes zero-crossing switching for longer lifespan. Configurable with DALI Cockpit software.

Compact relay module for direct control of 230V AC loads via DALI. Switches permanent loads up to 2kW. DALI-2 certified, configurable via DALI Cockpit.

Four-channel phase dimmer with DALI control for 230V dimmable lamps. Each output supports up to 10W load and 0.06A current per channel. Configurable via DALI Cockpit. DIN rail mounting.

DALI-2 4-channel relay controller for DIN rail mounting. Each channel has its own DALI address. Suitable for relays with 12-48V DC control. Configurable via DALI Cockpit.

De 86456203-HS DALI 2 RM16 Din Rail is een DALI 2-gecertificeerde schakelaar die relaiscontacten biedt voor belastingen tot 2kW. Met zero-cross schakeling en geïntegreerde stroombegrenzing.

DALI-2 RM16 is a relay switch for integrating non-dimmable ballasts into DALI systems. Switches up to 2kW at 250V AC, with configurable power-up and system-failure settings. Features zero-cross switching.

DALI RM16 CEL ist ein DALI-gesteuertes Relais für 230V AC Lasten bis 2000VA. Zero-Cross-Schaltung und programmierbare Start-/Systemfehler-Einstellungen. DALI 2 zertifiziert.

DALI-2 Relay Compatible with DALI and DALI-2 versions 1 channel actuator (switch) with DALI-2 input

The DALI-2 RM16 I HS and IS HS provide DALI-bus controllable relay contacts for inrush currents up to 350A and a nominal current of 16A continuous, perfect for switching various loads up to 3.6 kW with zero voltage switching.

The DALI-2 RM16 HS WE is a DIN-rail mounted switching actuator with a changeover contact. It supports loads up to 2kW, offers zero-cross switching for longer lifespan, and is configurable with DALI Cockpit software.

The LCM-60DA2 LED driver provides 60W of constant current (CC) with DALI 2.0 and push dimming. Offers modular outputs from 0.5A to 1.4A and an extra 12Vdc at 50mA.

DALI Jalousie module for ceiling installation. Suitable for controlling 230V blinds motors via DALI. 4 programmable operations for opening/closing and adjusting slat tilt. No extra power supply needed, only via DALI.

DALI Jalousie module for controlling 230V blind motors via DALI. Supports 4 functions for opening/closing and adjusting the slat angle. Suitable for DIN rail and ceiling mount.

DALI 4-channel relay controller, 12-48V DC, 4 DALI addresses, max input current 8A, max output current per channel 2A, IP20, configurable via DALI Cockpit. Suitable for ceiling mounting.

DALI-2 RM16 DE: DALI-controlled relay for 230V AC, 2000VA max load, zero cross switching, integrated current limiter. DALI 2 certified.

This DALI-2 certified relay controls LED lighting (max. 3.6A per channel). Suitable for DIN rail and screw mounting. Supports groups and scenes.

The DALI RM16 DE WE relay controls 230V AC loads up to 2kW via DALI. Features inrush current limitation and configurable behavior on bus failure. Ideal for high inrush currents.